Your HP printer will disconnect and reconnect to the new network if you have recently switched WiFi networks. Reconnecting your printer is a simple operation, regardless of whether you've upgraded your router or just changed your WiFi password. We'll take you step-by-step through the process in this guide to get your HP printer back online, along with some troubleshooting advice and a conclusion to make sure everything goes smoothly.
Step 1: Clear the Network Settings on the Printer
You must reset the network settings on your HP printer before you can connect it to the new WiFi. By doing this, the printer is ready for the new connection and the old WiFi settings are cleared out.
Activate the HP printer. Find the Wireless button (it may resemble an antenna or radio wave icon) on the printer control panel. When the wireless light begins to blink, press and hold the Wireless button. This suggests that the wifi settings of the printer have been reset. For instructions on how to reset network settings using the touch screen on printers without a wireless button, consult the handbook for your device.
Step 2: Attach the printer again to the newly created WiFi network
To connect your printer to the new WiFi after the network settings have been reset, take the following actions: Making use of the HP Smart App. Install the HP Smart App on your PC or smartphone after downloading it. Click the Add Printer option after opening the program. The app will look for printers that are available. Choose your printer after it has been located. You'll be prompted by the app to enter your new WiFi credentials, which include your network name and password. Your printer will join to the new network once the login details have been input.
Step 3: Reinstall your computer's printer
You might have to manually reinstall the newly connected printer if your computer doesn't recognize it right away. This is how you do it: Navigate to Printers & Scanners under Settings > Devices. To enable your computer to look for available printers, click Add a Printer. To finish the installation, choose your HP printer from the list and adhere to the on-screen directions.
Troubleshooting Typical Problems
If you're having difficulties reconnecting your HP printer after switching WiFi networks, try these troubleshooting steps:
- Make sure your device and printer are connected to the same WiFi network.
- Verify that the printer and router are in range of one another. Connectivity problems can arise from weak transmissions.
- To restore network connectivity, restart the router and the printer.
- Make sure you're typing the WiFi password correctly by checking it twice. All it takes is one small misspelling to stop the printer from connecting.
- Sometimes, outdated printer firmware can lead to problems with connections. Use the HP Smart App or the printer's control panel to check for updates, then install any that are available.
Conclusion
It's easy to reconnect your HP printer after adjusting your WiFi, but you should carefully follow the instructions to prevent any problems. It should just require a few minutes to reset the network settings and establish a fresh WiFi connection, whether you do it through the HP Smart App or the printer's control panel. If you encounter any issues, the above troubleshooting advice should assist you in fixing them.
Related Blog :